Frequently bought together:
Description
WS-X6716-10G-3CXL Overview
WS-X6716-10G-3CXL consists of 16 X2 10 Gigabit Ethernet fiber ports line card module for Cisco Catalyst 6500 series only. WS-X6716-10G-3CXL equipped with WS-X6716-10G and WS-F6700-DFC3CXL and primarily designed for Supervisor Engine 720 with 3CXL daughter card to support Cisco 6500 Virtual Switching System (VSS) 1440. WS-X6716-10G-3CXL is ideally suited for LAN campus aggregation and data center access. Users can configure 4 port groups of 4 ports each, each port group in either oversubscription mode or performance mode. In performance mode, up to 4 10 Gigabit Ethernet ports can be used to create a virtual switch link in a VSS.Quick spec of WS-X6716-10G-3CXL
- Product Code : WS-X6716-10G- 3CXL
- Feature : 16-Port 10GbE Fiber Module
- Ports : 16
- Optics : X2
- Switch fabric connection : 40 Gbps (80 Gbps full duplex)
- Oversubscription : 4:1
- Forwarding engine : ● WS-X6716-10G-3CXL: equipped with DFC3CXL for distributed forwarding, supporting 1 million routes
- Queues : Oversubscription mode: ● Receive: 1p7q2t per port ● Transmit: 1p7q4t per port group Performance mode: ● Receive: 8q4t per port ● Transmit: 1p7q4t per port
- Queuing mechanisms : ● CoS-based queue mapping ● DSCP-based queue mapping
- Scheduler : Oversubscription mode: ● DWRR ● WRED Performance mode: ● DWRR ● WRED ● SRR at egress
- Port buffers : Oversubscription mode: ● 90 MB per port group Performance mode: ● 200 MB per port
- Hardware-based multicast replication (Layer 2) : ● Ingress and egress ● Approximately 20 GB per replication engine ● 2 replication engines per module
- Hardware-based multicast replication (Layer 3) : ● Ingress and egress ● Approximately 20 GB per replication engine ● 2 replication engines per module
- Jumbo frame support for bridged and routed packets : Up to 9216 bytes
- Maximum port density per chassis : 130 ports (9-slot chassis)
- Maximum port density per VSS : 260 ports
- Can be used to form virtual switch link : ● Performance mode: Yes (supported in a subsequent software release) ● Oversubscription mode: No
- Supervisor engines supported : Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10GE uplinks or Supervisor Engine 720 with any PFC (chassis will work in lowest common denominator mode)
- Chassis supported : ● Any Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E, and C6509-NEB-A chassis with dual fan tray (NEBS compliant: operating temperature up to 55°C), or; ● Non-E-Series chassis with fan tray 2, including Cisco Catalyst 6506, 6509, 6513, and C6509-NEB-A with single fan tray (non-NEBS compliant: operating temperature up to 40°C) ● Not supported in Cisco Catalyst 6503 non-E Series chassis and 7600 Series chassis
- Slot requirements : ● Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506, 6506-E, 6509, 6509-E, 6509-V-E, or 6509-NEB-A chassis ● Can occupy only slots 9 through 13 in a Cisco Catalyst 6513 chassis
- Onboard memory : 1 GB default
WS-X6716-10G-3CXL Specification
- Standard protocols :IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3ak, IEEE 802.3aq, and IEEE 802.3an
-
Physical specifications
:
- Occupies one slot in the Cisco Catalyst 6500 Series chassis or Cisco 7600 Series chassis
- Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm)
- Weight: ◦ Cisco Catalyst 6708 and 6716: 13 pounds excluding X2 components; ¼ pound for each X2 ◦ Cisco Catalyst 6704: 10 pounds excluding XENPAK and DFC components; 2/3 pound for each XENPAK
-
Environmental conditions
:
- Operating temperature:
- Agency-certified for operation: 32 to 104°F (0 to 40°C)
- Design and tested for operation 32 to 130°F (0 to 55°C)
- Storage temperature: –40 to 167°F (–40 to 75°C)
- Relative humidity: 10 to 90 percent, noncondensing Operating altitude:
- Agency-certified for operation: –500 to 6500 ft (–150 to 2000m)
- Designed and tested for operation –500 to 10000 ft (–150 to 3000m)
-
Regulatory compliance
:
- Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMC and safety standards: EMC Standards:
- FCC Part 15 (CFR 47) Class A
- ICES-003 Class A
- VCCI Class A
- EN55022 Class A
- EN55024
- CISPR24
- CISPR 22 Class A
- AS/NZS CISPR 22 Class A
- ETS 300 386
- KN 22 Class A
- EN 50082-1
- EN61000-3-2
- EN61000-3-3
- EN61000-6-1
- CNS13438 Class A
- KN6100 -4 Series Safety Standards:
- UL 60950-1
- CAN/CSA C22.2 No. 60950
- EN 60950-1
- IEC 60950-1
- AS/NZS 60950-1
- IEC 60825 Class 1
- EN 60825 Class 1
- 21CFR 1040
- NEBS criteria levels :SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4)
-
ETSI
:
- ETS 300 019-2-1, Class 1.1 Storage
- ETS 300 019-2-2, Class 2.1 and 2.2 Transportation
- ETS 300 019-2-3, Class 3.1E Stationary Use
-
Network management
:
- ETHERLIKE-MIB (RFC 1643)
- IF-MIB (RFC 1573)
- Bridge MIB (RFC 1493)
- CISCO-STACK-MIB
- CISCO-VTP-MIB
- CISCO-CDP-MIB
- RMON MIB (RFC 1757)
- CISCO-PAGP-MIB
- CISCO-STP-EXTENSIONS-MIB
- CISCO-VLAN-BRIDGE-MIB
- CISCO-VLAN-MEMBERSHIP-MIB
- ENTITY-MIB (RFC 2037)
- HC-RMON
- RFC1213-MIB (MIB-II)
- SMON-MIB
-
Power requirements
:
- WS-X6716-10T-3C: 509.3W (12.1A @ 42V)
- WS-X6716-10T-3CXL: 538.7W (12.8A @ 42V)
- WS-X6716-10G-3C: 457.8W (10.9A @ 42V)
- WS-X6716-10G-3CXL: 487.2W (11.6A @ 42V)
- WS-X6708-10G-3C: 444.36W (10.58A @ 42v)
- WS-X6708-10G-3CXL: 473.76w (11.28A @ 42V)
- WS-X6704-10GE with DFC3CXL: 362.46W (8.63A @ 42V)
- WS-X6704-10GE with DFC3C: 333.06W (7.93A @ 42V)
- WS-X6704-10GE with DFC3BXL: 402.36W (9.58A @ 42V)
- WS-X6704-10GE with DFC3B: 377.16W (8.98A @ 42V)
- WS-X6704-10GE with DFC3A: 389.76W (9.28A @ 42V)
- WS-X6704-10GE with CFC: 295.26W (7.03A @ 42V)
-
Indicators
:
- Status: green (operational), red (faulty), and orange (module booting)
- Link: green (port enabled and connected), orange (port disabled), and off (port enabled and not connected)