Cisco ASR1000-RP1 Route Processor 1 for Cisco ASR1000 Series Router

Quick spec of ASR1000-RP1-Ref

• Model : ASR1000-RP1
• Chassis support : ASR1004 ASR1006
• Cisco IOS XE operating system : 32 bit
• CPU : General-purpose CPU based on 1.5-GHz processor
• Memory : 4 GB
• Built-in eUSB/eMMC bootflash : 1 GB (8 GB on ASR 1002)
• Storage : 40 GB HDD and external USB

ASR1000-RP1-Ref Specification

• Chassis support :Cisco ASR 1004 and ASR 1006 chassis (Note: The Cisco ASR 1002 chassis comes with the Cisco ASR 1000 Series RP1 built into the chassis.) (Note: Cisco ASR 1001, ASR 1001-X, and ASR 1002-X (part numbers ASR1001, ASR1001-X, ASR1002-X) have an integrated Route Processor built in to the chassis that is not upgradable)
• Software compatibility :Cisco IOS XE Operating System, which is based on Cisco IOS Software Release 12.2SR (Please consult your Cisco account representative for additional details.)
• Software protocols :Refer to Cisco IOS Software 12.2SR protocol support
• Connectivity :
  •   Console port (RJ-45 connector)
  •   Auxiliary port (RJ-45 connector)
  •   10/100/1000 Ethernet port (RJ-45 connector)
  •   Two RJ-48 connectors for BITS input clocks
• Memory options :
  •   Two 1-GB Double Data Rate 2 (DDR2) mini-DIMMs
  •   Two 2-GB DDR2 mini-DIMMs
  •   Upgradable memory from 2-GB to 4-GB DRAM
• Storage options :
  •   40-GB HDD (RP1 only)
  •   1-GB USB Compact Flash memory
• Performance :
  •   Scalability up to 1,000,000 IPv4 routes or 500,000 IPv6 routes
  •   BGP RR Scalability up to 5,000,000 IPv4 routes or 3,000,000 IPv6 routes
• Reliability and availability :
  •   1 + 1 redundancy in dual-route-processor configuration
  •   Support for online insertion and removal (OIR)
  •   Support for NSF and Stateful Switchover (SSO)
  •   Support for ISSU
• MIBs :  RFC 2737 compliant
• Network management :
  •   Telnet and Secure Shell (SSH) Protocol (command-line interface [CLI])
  •   Console port (through the CLI)
  •   Simple Network Management Protocol (SNMP)
  •   RFC 2665
• LEDs :
  •   PWR - Power Green - All power rails are within specifications
  •   STAT - Status Green - Cisco IOS Software has booted Yellow - BootROM has successfully loaded Red - System failure or during boot process
  •   ACTV- Active Green - Active route processor
  •   STBY - Standby Yellow - Standby route processor
  •   CRIT - Critical Red - Critical alarm or during boot process
  •   MAJ - Major Red - Major alarm
  •   MIN - Minor Amber - Minor alarm
  •   LINK - Management Ethernet link status Solid green - Link with no activity FLASH green - Link with activity Off - No link
  •   DISK0 - Internal Compact Flash FLASH Green - Activity indicator Off - No activity
  •   DISK1 - External Compact Flash FLASH green - Activity indicator Off - No activity
  •   DISK2 - Internal HDD FLASH green - Activity indicator Off - No activity
  •   CARRIER - BITS interface Off - Out of service Green - In frame and in service Amber - Fault or loop condition
• Physical dimensions (H x W x D) :0.92 x 16.7 x 14.19 in. (0.02 x 0.428 x 0.36m)
• Approvals and compliance :
  • Safety
  •   UL60950-1 and CAN/CSA-C22.2 No. 60950-1-03 Information technology equipment
  •   AS/NZS 60950-1
  •   IEC/EN 60950-1 Information technology equipment
  •   73/23/EEC Electromagnetic Emissions Certification
  •   AS/NZ 3548: 1995 (including AMD I + II) Class B
  •   EN55022: 1998 Class B
  •   CISPR 22: 1997
  •   EN55022: 1994 (including AMD I + II)
  •   47 CFR Part 15: 2000 (FCC) Class B
  •   VCCI V-3/01.4 Class 2
  •   CNS-13438: 1997 Class B
  •   GR1089: 1997 (including Rev. 1: 1999) Immunity
  •   EN300386: 2000-TNE EMC requirements; product family standard; high priority of service; central office and noncentral office locations
  •   EN50082-1: 1992/1997
  •   EN50082-2: 1995-Generic Immunity Standard, Heavy Industrial
  •   CISPR24: 1997
  •   EN55024: 1998-Generic ITE immunity standard
  •   EN61000-4-2: 1995 + AMD I + II ESD, Level 4/8 kV contact, 15 kV air
  •   IEC-1000-4-3: 1995 + AMD 1-Radiated Immunity, 10 V/m
  •   IEC-1000-4-4: 1995-Electrical Fast Transients, Level 4/4 kV/B
  •   IEC-1000-4-5: 1995 + AMD 1-DC Surge-Class 3; AC Surge-Class 4
  •   EN61000-4-6: 1996 + AMD 1-RF conducted immunity, 10 Vrms
  •   EN61000-4-11: 1995-Voltage Dips and Sags
  •   ETS300 132-2: 1996 + corrigendum, December 1996
  •   GR1089:1997 (including Rev1: 1999) Network Equipment Building Standards The module meets the following Networking Equipment Building Standards (NEBS):
  •   GR-1089-CORE
  •   GR-63-CORE European Telecommunication Standards Institute (ETSI)
  •   ETSI 300 386-1 - Levels for equipment with a "high priority of service" that is installed in "locations other than telecommunication centers"
  •   ETSI 300 386-2:1997 - Levels for equipment with a "high priority of service" that is installed in "locations other than telecommunication centers"
  •   ETSI 300 132-2: December 1994 - Power supply interfaces at the input to telecommunications equipment Sections 4.8 and 4.9
• Environmental :
  •   Storage temperature: -38 to 150°F (-40 to 70°C)
  •   Operating temperature, nominal: 41 to 104°F (5 to 40°C)
  •   Operating temperature, short-term: 23 to 131°F (-5 to 55°C)
  •   Storage relative humidity: 5 to 95% relative humidity (RH)
  •   Operating humidity, nominal: 5 to 85% RH
  •   Operating humidity, short-term: 5 to 90% RH
  •   Operating altitude: -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)