NEW HPE Aruba R2H39A AP-505 US 2x2:2 802.11ax Wi-Fi 6 2x2:2 MIMO TAA WAP

(No reviews yet) Write a Review
Calculated at Checkout
Frequently bought together:


NEW HPE Aruba R2H39A AP-505 US 2x2:2 802.11ax Wi-Fi 6 2x2:2 MIMO TAA WAP

These affordable Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of mobile, IoT and mobility requirements. With a maximum real-world aggregate data rate of 1.49 Gbps (HE80/HE20), they deliver the speed and reliability needed for venues and workplaces such as schools, midsize offices and retailers


Quick Spec R2H39A

Additional Wi-Fi features

Each AP also includes the following standards-based technologies:

Transmit beamforming (TxBF)

Increased signal reliability and range

Passpoint Wi-Fi (release 2) (hotspot 2.0)

Seamless cellular-to-Wi-Fi carryover for guests

Dynamic frequency selection (DFS)

Optimized use of available RF spectrum

Maximum ratio combining (MRC)

Improved receiver performance

Cyclic delay/shift diversity (CDD/CSD)

Greater downlink RF performance

Space-time block coding

Increased range and improved reception

Low-density parity check (LDPC)

High-efficiency error correction for increased throughput

802.11mc fine timing measurement (FTM)

For precision distance ranging


R2H39A, Aruba AP-505 Specification

Technical specifications



802.11n/ac/ax packet aggregation:


Transmit power:

Configurable in increments of 0.5 dBm

Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):

2.4 GHz band: +21 dBm (18 dBm per chain) 5 GHz band: +21 dBm (18 dBm per chain)

Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain.

Wi-Fi antennas


Two integrated dual-band downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 4.9 dBi in 2.4 GHz and 5.7 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.

• Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 4.3 dBi in 2.4 GHz and

5.6 dBi in 5 GHz.

Other interfaces



E0: Ethernet wired network port (RJ-45)

• Auto-sensing link speed (10/100/1000BASE-T) and MDI/MDX

• PoE-PD: 48Vdc (nominal) 802.3af/at PoE (class 3 or 4)

• 802.3az Energy Efficient Ethernet (EEE)

DC power interface

12 Vdc (nominal, +/- 5%), accepts 2.1 mm/5.5 mm center-positive circular plug with 9.5 mm length

USB 2.0 host interface (type A connector)

Capable of sourcing up to 1A / 5W to an attached device

Bluetooth low energy(BLE5.0) and zigbee (802.15.4) radio

• BLE: up to 7 dBm transmit power (class 1) and -93 dBm receive sensitivity (1 Mbps)

• Zigbee: up to 6 dBm transmit power and -96 dBm receive sensitivity

Integrated vertically polarized omnidirectional antenna with roughly 30 degrees downtilt and peak gain of 3.3 dBi

Visual indictors

(two multi-color LEDs):

For system and radio status

Reset button:

Factory reset, LED mode control (normal/off)

Serial console interface

Proprietary, micro-B USB physical jack

Security slot

Kensington security slot

HPE Aruba Networking 500 Series Wireless Access Points Data Sheet

HPE Aruba J4859D 1GB BASE-LX LC SMF Optical SFP Transceiver

View AllClose


365 days
View AllClose

0 Reviews

View AllClose