Cisco N3K-C3132Q-40GE Nexus 3132Q 32-Port QSFP+

Quick spec of N3K-C3132Q-40GE-Ref

• Product Code : N3K-C3132Q-40GE
• Physical : · 1RU fixed form-factor switch · 32 QSFP+ ports; each supports native 40 Gigabit Ethernet and 4 x 10 Gigabit Ethernet modes · 4 SFP+ ports · 2 redundant power supplies · 4 redundant (3+1) fans · Management, console, and USB flash-memory ports
• Performance : · 2.5-Tbps switching capacity · Forwarding rate up to 1.4 bpps · Line-rate traffic throughput (both Layer 2 and 3) on all ports · Configurable maximum transmission units (MTUs) of up to 9216 bytes (jumbo frames)
• Physical dimensions (H x W x D) : 1.72 x 17.3 x 19.7 in. (4.4 x 43.9 x 50.5 cm)
• Weight : 21.5 lb (9.3 kg)

N3K-C3132Q-40GE-Ref Specification

• N3K-C3132Q-40GE Specification :n/a
• Physical :· 1RU fixed form-factor switch · 32 QSFP+ ports; each supports native 40 Gigabit Ethernet and 4 x 10 Gigabit Ethernet modes · 4 SFP+ ports · 2 redundant power supplies · 4 redundant (3+1) fans · Management, console, and USB flash-memory ports
• Performance :· 2.5-Tbps switching capacity · Forwarding rate up to 1.4 bpps · Line-rate traffic throughput (both Layer 2 and 3) on all ports · Configurable maximum transmission units (MTUs) of up to 9216 bytes (jumbo frames)
• Hardware tables and scalability* :Number of MAC addresses
• Number of VLANS :4096
• Number of spanning-tree instances :· RSTP: 512 · MSTP: 64
• Number of ACL entries :· 4000 ingress · 1000 egress
• Routing table :· 16,000 prefixes and 16,000 host entries · 8000 multicast routes
• Number of EtherChannels :64 (with vPC)
• Number of ports per EtherChannel :16
• System memory :4 GB
• Buffer size :12 MB shared
• Boot-flash memory :4 GB
• Power :Frequency
• Power supply types :· AC (forward and reversed airflow) · DC (forward and reversed airflow)
• Typical operating power :210W
• Maximum power :340W
• AC PSUs · Input voltage · Frequency · Efficiency :  · 100 to 240 VAC · 50 to 60 Hz · 89 to 91% at 220V
• DC PSUs · Input voltage · Maximum current (PSU output – System input) · Efficiency :  · –40 to –-72 VDC · 33A (400W unit) · 85 to 88%
• Power-supply efficiency :89 to 91% at 220V
• Typical heat dissipation :717 BTU/hr
• Maximum heat dissipation :1160 BTU/hr
• Cooling :· Forward and reversed airflow schemes ◦   Forward airflow: Port-side exhaust (air enters through fan tray and power supplies and exits through ports); supported with AC and DC power supplies ◦   Reversed airflow: Port-side intake (air enters through ports and exits through fan tray and power supplies); supported with AC power supply only · Redundant fans · Hot swappable (must swap within 1 minute)
• Sound :Measured sound power (maximum) · Fan speed: 40% duty cycle · Fan speed: 70% duty cycle · Fan speed: 100% duty cycle
• Environment :Dimensions (height x width x depth)
• Weight :21.5 lb (9.3 kg)
• Operating temperature :32 to 104°F (0 to 40°C)
• Storage temperature :–40 to 158°F (–40 to 70°C)
• Operating relative humidity :· 10 to 85% noncondensing · Up to 5 days at maximum (85%) humidity · Recommend ASHRAE data center environment
• Storage relative humidity :5 to 95% noncondensing
• Altitude :0 to 10,000 ft (0 to 3000m)