Cisco
Cisco A9K-MOD400-SE 400G 2x Open Module Slot (Service Edge) Router Line Card
- MPN:
- A9K‑MOD400‑SE
- Condition:
- Refurbished
- Shipping:
- Free Shipping
Description
A9K‑MOD400‑SE-Ref Overview
The Cisco ASR 9000 Series 400G Modular Line Card (A9K-MOD400-SE) is a powerful component designed for the Service Edge.
Port Configuration:
-
- 400-Gigabit Ethernet Ports: This line card offers 400G of bandwidth, allowing for high-speed connectivity.
- Modular Port Adapters (MPA): It has two open bays (bay 0 and bay 1) where you can plug in ASR 9000 Series MPAs. These MPAs provide flexibility in choosing port density, speed, and optics based on network requirements.
Customizable Slot Configuration:
-
- Mix and Match: You can customize each slot in the ASR 9000 by combining different modular port adapters. For instance:
- 400G Line Card: Pair a 20-port 10 Gigabit Ethernet MPA with a 2-port 100 Gigabit Ethernet MPA in a single slot, achieving a total bandwidth of 400 gigabits per slot.
- 200G Line Card: Use two 1-port 100 Gigabit Ethernet MPAs per slot for a total of 200 gigabits per slot. Alternatively, use a single 2-port 100 Gigabit Ethernet or a single 20-port 10 Gigabit Ethernet MPA to achieve the same bandwidth.
- Mix and Match: You can customize each slot in the ASR 9000 by combining different modular port adapters. For instance:
Versatile Applications:
-
- The ASR 9000 Series modular line cards, along with port adapters, support various customer applications, including video on demand, IPTV, point-to-point video, Internet video, and cloud-based computing.
- They also deliver economical, scalable, highly available, line-rate Ethernet, and IP/MPLS edge services.
A9K-MOD400-SE Specification
|
Description |
Specification |
|
Chassis compatibility |
Compatible with the Cisco ASR 9922, 9912, 9910, 9906, 9904, 9010, and 9006 routers |
|
Port density |
In the 400G modular line card, up to 2 modular port adapters are supported per line card for up to: ● 40-port 10G or 64-port 1G interfaces
● 4-port 40G interfaces
● 4-port 100G interfaces
In the 200G modular line card, two modular port adapters are supported per line card, except for the 2-port 100 Gigabit modular port adapter and the 20-port 10 Gigabit modular port adapter. The 2-port 100 Gigabit and 20-port 10 Gigabit modular adapters are supported only in bay 0 of the 200G modular line card. The achievable port density on this line card is as follows: ● 20-port 10G or 64-port 1G interfaces
● 4-port 40G interfaces
● 2-port 100G interfaces
|
|
Ethernet |
● IEEE 802.3 compliant
● 10 Gigabit Ethernet PHY monitoring
● IEEE 802.x flow control
● Full-duplex operation
● Per-port byte and packet counters for policy drops, oversubscription drops, Cyclic Redundancy Check (CRC) error drops, packet sizes, and unicast, multicast, and broadcast packets
|
|
Card density |
Maximum number of line cards per system: ● Cisco ASR 9922: 20
● Cisco ASR 9912: 10
● Cisco ASR 9910: 8
● Cisco ASR 9906: 4
● Cisco ASR 9904: 2
● Cisco ASR 9010: 8
● Cisco ASR 9006: 4
|
|
Options |
Each line card is available as either a service edge - optimized line card (enhanced QoS) or a packet transport - optimized line card (basic QoS) |
|
Reliability and availability |
Line card Online Insertion and Removal (OIR) support without system impact |
|
Network Equipment Building Standards (NEBS) |
Cisco ASR 9000 Series Routers are designed to meet: ● SR-3580: NEBS Criteria Levels (Level 3)
● GR-1089-CORE: NEBS EMC and Safety
● GR-63-CORE: NEBS Physical Protection
|
|
Operating temperature (nominal) |
41 to 104°F (5 to 40°C) |
|
Operating temperature |
23 to 131°F (-5 to 55°C) |
|
Operating humidity (nominal) relative humidity |
10 to 85% |
|
Storage temperature |
-40 to 158°F (-40 to 70°C) |
|
Storage relative humidity |
5 to 95% Note: Not to exceed 0.024 kg of water per kg of dry air |
|
Operating altitude |
-60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements) |
|
ETSI standards |
Cisco ASR 9000 Series Routers are designed to meet: ● EN300 386: Telecommunications Network Equipment (EMC)
● ETSI 300 019 Storage Class 1.1
● ETSI 300 019 Transportation Class 2.3
● ETSI 300 019 Stationary Use Class 3.1
● EN55022: Information Technology Equipment (Emissions)
● EN55024: Information Technology Equipment (Immunity)
● EN50082-1/EN-61000-6-1: Generic Immunity Standard
|
|
EMC standards |
Cisco ASR 9000 Series Routers are designed to meet: ● FCC Class A
● ICES 003 Class A
● AS/NZS 3548 Class A
● CISPR 22 (EN55022) Class A
● VCCI Class A
● BSMI Class A
● IEC/EN 61000-3-2: Power Line Harmonics
● IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
|
|
Immunity |
Cisco ASR 9000 Series Routers are designed to meet: ● IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
● IEC/EN-61000-4-3: Radiated Immunity (10V/m)
● IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
● IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
● IEC/EN-61000-4-5: Signal Ports (1kV)
● IEC/EN-61000-4-5: Surge DC Port (1kV)
● IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
● IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
● IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
|
|
Safety |
Cisco ASR 9000 Series Routers are designed to meet: ● UL/CSA/IEC/EN 60950-1
● IEC/EN 60825 Laser Safety
● ACA TS001
● AS/NZS 60950
● FDA: Code of Federal Regulations Laser Safety
|
Datasheet
Related Products
Cisco A9K-MOD80-SE 2x Open Expansion Module Slot (Service Edge) Line Card
Cisco
NEW Cisco A9K-MOD80-SE 2x Open Expansion Module Slot (Service Edge) Line Card
Cisco
