HPE Aruba R2H29A AP-505 (US) Dual Radio 2x2:2 802.11ax Wi-Fi 6 2x2:2 MIMO WAP
These affordable Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of mobile, IoT and mobility requirements. With a maximum real-world aggregate data rate of 1.49 Gbps (HE80/HE20), they deliver the speed and reliability needed for venues and workplaces such as schools, midsize offices and retailers
Quick Spec R2H29A
|
Additional Wi-Fi features |
|
|
Each AP also includes the following standards-based technologies: |
|
|
Transmit beamforming (TxBF) |
Increased signal reliability and range |
|
Passpoint Wi-Fi (release 2) (hotspot 2.0) |
Seamless cellular-to-Wi-Fi carryover for guests |
|
Dynamic frequency selection (DFS) |
Optimized use of available RF spectrum |
|
Maximum ratio combining (MRC) |
Improved receiver performance |
|
Cyclic delay/shift diversity (CDD/CSD) |
Greater downlink RF performance |
|
Space-time block coding |
Increased range and improved reception |
|
Low-density parity check (LDPC) |
High-efficiency error correction for increased throughput |
|
802.11mc fine timing measurement (FTM) |
For precision distance ranging |
R2H29A, Aruba AP-505 Specification
|
Technical specifications |
|
|
Model |
AP-505 |
|
802.11n/ac/ax packet aggregation: |
A-MPDU, A-MSDU |
|
Transmit power: |
Configurable in increments of 0.5 dBm |
|
Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): |
2.4 GHz band: +21 dBm (18 dBm per chain) 5 GHz band: +21 dBm (18 dBm per chain) Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain. |
|
Wi-Fi antennas |
|
AP-505 |
|
Two integrated dual-band downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 4.9 dBi in 2.4 GHz and 5.7 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees. • Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 4.3 dBi in 2.4 GHz and 5.6 dBi in 5 GHz. |
|
Other interfaces |
|
|
Model |
AP-505 |
|
E0: Ethernet wired network port (RJ-45) |
• Auto-sensing link speed (10/100/1000BASE-T) and MDI/MDX • PoE-PD: 48Vdc (nominal) 802.3af/at PoE (class 3 or 4) • 802.3az Energy Efficient Ethernet (EEE) |
|
DC power interface |
12 Vdc (nominal, +/- 5%), accepts 2.1 mm/5.5 mm center-positive circular plug with 9.5 mm length |
|
USB 2.0 host interface (type A connector) |
Capable of sourcing up to 1A / 5W to an attached device |
|
Bluetooth low energy(BLE5.0) and zigbee (802.15.4) radio |
• BLE: up to 7 dBm transmit power (class 1) and -93 dBm receive sensitivity (1 Mbps) • Zigbee: up to 6 dBm transmit power and -96 dBm receive sensitivity Integrated vertically polarized omnidirectional antenna with roughly 30 degrees downtilt and peak gain of 3.3 dBi |
|
Visual indictors (two multi-color LEDs): |
For system and radio status |
|
Reset button: |
Factory reset, LED mode control (normal/off) |
|
Serial console interface |
Proprietary, micro-B USB physical jack |
|
Security slot |
Kensington security slot |
HPE Aruba Networking 500 Series Wireless Access Points Data Sheet
