ASR1009-X-Ref Overview
The Cisco ASR 1009-X Router is for medium and high-end enterprises with up to 200 Gbps total system bandwidth in a 9-rack-unit (9RU) form factor. With the ASR 1009-X, you can benefit from best-in-class service performance and network resilience through redundant hardware and carrier class software.Quick spec of ASR1009-X-Ref
- Product Code : ASR1009-X
- Default memory : 8-GB DRAM RP2 8-GB DRAM RP3
- Number of SIPs or Ethernet line cards supported : 3
- Shared port adapters : 12 SPA slots
- Ethernet port adapters : 6 EPA slots
- Route processor : 2 route-processor slots
- Network interface module : No
- Weight : 154 lb (70 kg)
- Dimensions (W x D x H) : 437.4 mm x 461.0 mm x 399.3 mm
ASR1009-X-Ref Specification
-
Physical specifications
Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets.
Refer to the applicable hardware installation guide for additional details.
:
- Height: 15.72 in. (399.3 mm) Width: 17.2 in. (437.4 mm) Depth: 18.15 in. (461.0 mm) Weight:
- 50 lb empty
- 154 lb (70 kg) (with three fan modules, four AC power supplies, two power bay blanks, two Cisco ASR1000 Series 200-Gbps ESPs [ASR1000-ESP200], two Cisco ASR 1000 Series RP2s [ASR1000-RP2], three Cisco ASR 1000 Series 100-Gbps MIPs [ASR1000-MIP100], six EPA blanks, and no EPAs)
- Default memory :8-GB DRAM RP2 8-GB DRAM RP3
- Number of SIPs or Ethernet line cards supported :3
- Shared port adapters :12 SPA slots
- Ethernet port adapters :6 EPA slots
- Cisco ASR 1000 Series ESP :2 ESP slots
- Route processor :2 route-processor slots
- Redundancy :Hardware: Yes
- Built-in Gigabit Ethernet ports :0
- Built-in 10 Gigabit Ethernet port :No
- Network interface module :No
- Cisco ASR 1000 Series :Cisco ASR 1009-X
- ESP support :Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40), Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100), and Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200)
- ESP bandwidth :40 to 200 Gbps
- ESP memory :Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40): 8-GB DRAM Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100): 16-GB DRAM Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200): 32-GB DRAM
- SIPs and Ethernet line cards :Supports Cisco ASR 1000 Series 40-Gbps SIP Carrier Card (ASR1000-SIP40), Cisco ASR1000 Series MIP 100-Gbps Carrier Card (ASR1000-MIP100), and ASR 1000 Fixed Ethernet Line Card; two 10 GE + twenty 1 GE (ASR1000-2T+20X1GE) line cards; and six 10 GE line cards (ASR1000-6TGE)
- Embedded hardware-based encryption :Yes: On Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) with up to 11-Gbps crypto support throughput, Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) with up to 29-Gbps crypto support throughput, and Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) with up to 78-Gbps crypto support throughput
- Minimum Cisco IOS XE Software release :Cisco IOS XE Software Release 3.16.0
- Rack-mounting :Yes: 19-inch
- Wall-mounting :No
- External USB flash memory :1-GB USB flash-memory support
- Redundant power supply :Yes: Dual power supplies by default, expandable up to a total of six, depending on configuration and redundancy preferences; option of either 1100W AC or 950W DC Note: A mix of AC and DC power supplies is not supported.
- Power input :Worldwide ranging AC input range (85 to 264 VAC) Worldwide ranging DC (-40 to -72; -48V nominal)
-
Power consumption
:
- Maximum (DC): 5200W
- Maximum (AC): 5100W
- Maximum (out): 4575W
- Airflow :Front-to-back
- Operating temperature (nominal) :Same as for Cisco ASR 1001-X
- Operating temperature (short-term) :Same as for Cisco ASR 1001-X
- Operating humidity (nominal) (relative humidity) :Same as for Cisco ASR 1001-X
- Operating humidity (short-term) :Same as for Cisco ASR 1001-X
- Storage temperature :Same as for Cisco ASR 1001-X
- Storage humidity (relative humidity) :Same as for Cisco ASR 1001-X
- Operating altitude :Same as for Cisco ASR 1001-X
- Network Equipment Building Standards (NEBS) :GR-1089 and GR-63 (in progress)
- EMC standards :Same as for Cisco ASR 1001-X
- Safety Standard :UL60950-1 CSA C22.2 No. 60950-1-03 EN 60950-1 IEC 60950-1 AS/NZS 60950.1
