MPC10E-10C-P-BASE MPC10E-10C Integrated SKU with Base HW + Standard JUNOS Juniper MX Series Modular Port Concentrator
Overview
The MPC10E-10C-MRATE is a high-performance modular interface card from Juniper Networks, designed for use with the MX Series routers, particularly in dense, high-capacity routing applications. It supports multirate interfaces, providing flexibility across a range of port speeds. This MPC offers the flexibility to handle a variety of Ethernet speeds, making it ideal for environments that require adaptable and high-throughput routing solutions, such as cloud data centers and large-scale enterprise networks.
Specifications
- Product Family: Juniper MX Series Modular Port Concentrators (MPC)
- Model: MPC10E-10C-MRATE
- Ports:
- 10 x 100GbE (QSFP28) ports
- Each 100GbE port supports multirate configurations, which can operate at:
- 100Gbps (QSFP28)
- 40Gbps (QSFP+)
- 4 x 10Gbps (via breakout to SFP+)
- 4 x 25Gbps (via breakout to SFP28)
- Performance and Capacity:
- Throughput: 1.2 Tbps per MPC
- Forwarding Rate: 600 Mpps (Million packets per second)
- Fabric Capacity: Up to 800 Gbps full-duplex capacity per slot.
- Packet Forwarding Engine (PFE) Features:
- Enhanced DDoS Protection: Provides hardware-based protection against Distributed Denial of Service (DDoS) attacks.
- Layer 2 and Layer 3 Forwarding: Supports a wide range of Layer 2 and Layer 3 protocols.
- J-Flow: Supports scalable flow-based telemetry for monitoring and diagnostics.
- Routing Features:
- Layer 2:
- VLAN support (IEEE 802.1Q)
- Link Aggregation (LACP)
- Spanning Tree Protocol (STP, RSTP, MSTP)
- Ethernet OAM (Operations, Administration, and Maintenance)
- Layer 3:
- IPv4/IPv6 unicast and multicast routing
- MPLS (Multiprotocol Label Switching) with Layer 3 VPN and L2VPN support
- BGP, OSPF, IS-IS, and RIP routing protocols
- EVPN-VXLAN: For scalable Layer 2 bridging over IP or MPLS networks.
- Buffering and QoS:
- Onboard Packet Buffer: Approximately 30 MB per port group for efficient packet handling.
- Quality of Service (QoS):
- Supports advanced QoS features, including traffic policing, shaping, classification, and scheduling.
- Hierarchical QoS for fine-grained control over traffic flows.
- Power and Environmental:
- Power Consumption: Approximately 500W (varies based on configuration and traffic patterns).
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Humidity: 5% to 90% non-condensing.
- Optics and Transceivers:
- Supported Transceivers:
- QSFP28 for 100GbE
- QSFP+ for 40GbE
- Breakout to SFP+ (10GbE) or SFP28 (25GbE) for lower-speed connections.
- Chassis Compatibility:
- Supported Platforms: Compatible with Juniper MX240, MX480, MX960, MX2008, MX2010, and MX2020 chassis.
- Use Cases:
- Service Provider Edge: Ideal for service provider edge deployments, offering dense multirate port configurations for various traffic types and speeds.
- Data Center Interconnect (DCI): Suitable for high-throughput, low-latency data center interconnect applications.
- Cloud and Enterprise Networks: Flexible multirate support makes it ideal for modern cloud and enterprise routing architectures, providing high bandwidth and traffic engineering capabilities.
- Condition: New
