Juniper MPC10E-15C-MRATE

Specifications

• Model: MPC10E-15C-MRATE
  
• Product Type: Modular Port Concentrator (MPC) for Juniper MX Series routers.
• Ports:
• 15 x 100GE ports (QSFP28)
• Each 100GE port can support:
• 100Gbps
• 40Gbps
• Breakout into 4 x 10Gbps or 4 x 25Gbps (via breakout cables)
• Performance and Capacity:
• Throughput:
• 1.2 Tbps of forwarding capacity per MPC.
• Each port can support up to 100 Gbps.
• Forwarding Rate: Up to 600 Mpps (Million packets per second).
• Port Configurations:
• Port Speeds Supported:
• 100GbE (QSFP28)
• 40GbE (QSFP+)
• 4 x 10GbE (via breakout QSFP+ or QSFP28)
• 4 x 25GbE (via breakout QSFP28)
• Routing and Forwarding Features:
• Layer 2 Features:
• VLAN support with 802.1Q VLAN tagging (up to 4096 VLANs).
• Spanning Tree Protocol (STP), including Rapid STP (RSTP) and Multiple STP (MSTP).
• Link Aggregation Control Protocol (LACP) for bundling multiple physical links into logical links.
• Layer 3 Features:
• Full IPv4 and IPv6 unicast and multicast routing.
• Routing protocols: OSPF, IS-IS, BGP, EIGRP, RIP, and static routing.
• Virtual Router Redundancy Protocol (VRRP).
• Equal-Cost Multipath (ECMP) routing for load balancing.
• MPLS Support:
• Layer 2 and Layer 3 VPNs using MPLS.
• MPLS Traffic Engineering (TE) for optimized path selection.
• MPLS Fast Reroute (FRR) for quick failover.
• Segment Routing (SR) for advanced traffic engineering and reduced complexity.
• Multicast Support:
• PIM (Protocol Independent Multicast) Sparse Mode (PIM-SM), Dense Mode (PIM-DM).
• IGMP and multicast listener discovery (MLD).
• Quality of Service (QoS):
• Advanced QoS Features:
• Supports classification, policing, marking, and shaping.
• Hierarchical QoS (HQoS) for fine-grained traffic management.
• Multiple egress queues per port for priority-based traffic handling.
• Security Features:
• Access Control Lists (ACLs): Supports both IPv4 and IPv6 ACLs for traffic filtering based on multiple parameters.
• Control Plane Policing (CoPP): Protects the router's control plane from Denial of Service (DoS) attacks.
• MACsec: Hardware-based encryption for secure data transmission (depending on optics support).
• Redundancy and High Availability:
• Redundancy:
• The MPC is designed for use in high-availability environments, supporting redundant chassis configurations.
• Supports In-Service Software Upgrades (ISSU) and Graceful Restart to ensure minimal service disruption during maintenance.
• Failover Capabilities:
• Supports fast failover with MPLS FRR and bidirectional forwarding detection (BFD).
• Optics and Transceivers:
• Supported Transceivers:
• QSFP28 for 100GbE: Supports various types such as 100GBASE-SR4, 100GBASE-LR4, and 100GBASE-ER4.
• QSFP+ for 40GbE: Supports standards such as 40GBASE-SR4, 40GBASE-LR4, and 40GBASE-ER4.
• Breakout options: Can break out into 4x25GbE or 4x10GbE using appropriate optics and cables.
• Power and Environmental:
• Power Consumption: Approx. 500W (varies based on traffic load and configuration).
• Operating Temperature: 32°F to 104°F (0°C to 40°C).
• Operating Humidity: 5% to 90% non-condensing.
• Chassis Compatibility:
• Supported Platforms: Compatible with various Juniper MX Series chassis, including:
• MX240
• MX480
• MX960
• MX2010
• MX2020
• Key Features:
• High Port Density: Provides up to 15 ports of 100GbE, allowing for dense 100GbE connectivity in core or edge routing environments.
• Flexibility: Supports a variety of port speeds (100GbE, 40GbE, 25GbE, and 10GbE) via breakout cables, making it adaptable to different network architectures.
• Advanced Routing: Ideal for large-scale service provider networks and enterprises with extensive Layer 2, Layer 3, MPLS, and QoS requirements.
• Scalability: Designed to scale efficiently with a throughput of 1.2 Tbps per MPC, supporting high-performance networking.
• Use Cases:
• Service Provider Core and Edge: Suitable for large service providers needing high-capacity routing with flexible port configurations and MPLS services.
• Data Center Interconnect (DCI): High-throughput and low-latency connectivity between data centers, with the ability to handle large-scale workloads.
• Enterprise Core: Suited for large enterprises with high-bandwidth requirements and the need for advanced Layer 3 and MPLS services.