WS-X6908-10G-2T Overview
Cisco Catalyst 6900 Series 8-port 10 Gigabit Ethernet Fiber Module WS-X6908-10G-2T is the first 10 G Ethernet module for the Cisco Catalyst 6500 series switch that supports Cisco TrustSec and Layer 2 encryption in hardware to enable IEEE 802.1ae (MACSec) encryption for Role-Based Access Control (RBACL) functionality. The module comes with WS-X6908-10GE and WS-F6K-DFC4-E daughter card and it is exclusively supported by Supervisor Engine 2T, which allows the system delivering 3 times the performance and 4 times the scalability for Catalyst 6500 series switches in comparison to the previous generation. WS-X6908-10G-2T interface module supports X2 optics and Virtual Switch link (VSL) on all 8 ports. WS-X6908-10G-2T is designed for designed for deployment in the distribution and core of the campus and data center for traffic aggregation in a network requiring security, manageability, virtualization, application performance, and video.Quick spec of WS-X6908-10G-2T
- Product Code : WS-X6908-10G-2T
- Product Description : Cisco Catalyst 6500 Series 10 Gigabit Ethernet interface module WS-X6908-10G-2T
- Devide Tyde : 10 Gigabit Ethernet interface Fiber module
- Ports : 8 * 10G X2 ports
- Switch fabric connection : 80 Gbps full duplex
- Forwarding Engine : WS-F6K-DFC4-E
- ACL entries : 64,000
- Netflow entries : 512,000
- Routing entries : 256,000
- Bridge Domains : 16,000
- MAC address : 128,000
- Multicast routing : 256,000
- IPv4 forwarding speed : 60 Mpps
- Scheduler : ● Deficit Weighted Round Robin (DWRR) ● Weighted Random Early Detection (WRED) ● Smoothed Round Robin (SRR) at egress
- Virtual Switch Link (VSL) : Yes (all ports)
- Port buffers : ● 256MB per port
- Queuing Mechanisms : ● CoS-based queue mapping ● DSCP-based queue mapping
- Hardware-based Multicast replication : ● Ingress and egress ● Approximately 20 GB per replication engine ● 2 replication engines per module
- Jumbo frame support for bridged and routed packets : Up to 9216 bytes
- Maximum port density per chassis : ● 64 ports (6513-E chassis) ● 88 ports (6509-E chassis)
- Maximum port density per VSS : ● 128 ports (6513-E chassis) ● 176 ports (6509-E chassis)
- Supervisor engines supported : Cisco Catalyst 6500 Series Supervisor Engine VS-S2T-10G
- Onboard memory : 2 GB default
- Power requirement : 588 Watts
WS-X6908-10G-2T Specification
- Product Description :Cisco Catalyst 6500 Series 10 Gigabit Ethernet interface module WS-X6908-10G-2T
- Devide Tyde :10 Gigabit Ethernet interface Fiber module
- Ports :8 * 10G X2 ports
- Switch fabric connection :80 Gbps full duplex
- Forwarding Engine : WS-F6K-DFC4-E
- ACL entries :64,000
- Netflow entries :512,000
- Routing entries :256,000
- Bridge Domains :16,000
- MAC address :128,000
- Multicast routing :256,000
- IPv4 forwarding speed :60 Mpps
-
Scheduler
:
- Deficit Weighted Round Robin (DWRR)
- Weighted Random Early Detection (WRED)
- Smoothed Round Robin (SRR) at egress
- Virtual Switch Link (VSL) :Yes (all ports)
- Port buffers : 256MB per port
-
Queuing Mechanisms
:
- CoS-based queue mapping
- DSCP-based queue mapping
-
Hardware-based Multicast replication
:
- Ingress and egress
- Approximately 20 GB per replication engine
- 2 replication engines per module
- Jumbo frame support for bridged and routed packets :Up to 9216 bytes
-
Maximum port density per chassis
:
- 64 ports (6513-E chassis)
- 88 ports (6509-E chassis)
-
Maximum port density per VSS
:
- 128 ports (6513-E chassis)
- 176 ports (6509-E chassis)
- Supervisor engines supported :Cisco Catalyst 6500 Series Supervisor Engine VS-S2T-10G
- Onboard memory :2 GB default
- Power requirement :588 Watts
