C6800-48P-TX-ref Overview
C6800-48P-TX is Cisco Catalyst 6800 48-port 1GE copper module with integrated DFC4. This C6800-48P-TX is similar with the C6800-48P-TX=. The C6800-48P-TX= is a spare one.Quick spec of C6800-48P-TX-ref
- Product Code : C6800-48P-TX
- Product Type : 6800 Series 1 Gigabit Modules
- Transceiver Type : RJ-45
- Ports/Interface/ Connectors : 48-port, RJ-45, 100m, Category 5 cable
- Port Density/ Chassis Model : ·240 ports/C6807-XL·528 ports/6513E·384 ports/6509E
- Maximum Frame Size : Up to 9216 bytes/frame
- Fabric channel speed : 20 Gb/sec
- Pluggable transceivers : Not supported
- TDR support : Supported
- Buffer Size per Port : ·Rx-166KB·Tx-1.17MB
- Onboard Memory : 1GB Default
- Power Requirements : 405 and 410 Watts respectively
- Backplane connection : Connects to the switch fabric using dual full-duplex 20-Gbps switch fabric channels (40 Gbps total).
- Chassis/slot support : Can occupy slots 1-2 and 5-7 in C6807-XL chassis. Can occupy any slots in Cisco Catalyst 6503E, 6504E, 6506E, 6509E, and 6509-V-E. Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E.
- Supervisor engine : Compatible with Supervisor Engine 2T and Supervisor Engine 2TXL.
- Distributed forwarding and performance : Comes equipped with DFC4 or DFC4XL daughter cards, delivering optimal performance up to a sustained 60 Mpps for L2, IPv4 and MPLS forwarding and 30 Mpps for IPv6 forwarding.
- Backplane connection : Connects to the switch fabric using dual full-duplex 20-Gbps switch fabric channels (40 Gbps total).
- Chassis/slot support : Can occupy slots 1-2 and 5-7 in C6807-XL chassis. Can occupy any slots in Cisco Catalyst 6503E, 6504E, 6506E, 6509E, and 6509-V-E. Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E.
- Supervisor engine : Compatible with Supervisor Engine 2T and Supervisor Engine 2TXL.
- Distributed forwarding and performance : Comes equipped with DFC4 or DFC4XL daughter cards, delivering optimal performance up to a sustained 60 Mpps for L2, IPv4 and MPLS forwarding and 30 Mpps for IPv6 forwarding.
- Dimensions (H x W x D) : 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis.
- Weight : 8.24 lb (3.74 kg)
C6800-48P-TX-ref Specification
- Dimensions (H x W x D) :1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis.
- Weight :8.24 lb (3.74 kg)
- Operating temperature :Certified for operation: 32° to 104°F (0° to 40°C) Designed and tested for operation: 32° to 130°F (0° to 55°C)
- Humidity (RH) ambient (noncondensing) :10 to 90 percent
- Operating altitude :Certified for operation: 0 to 6500 ft (0 to 2000 m) Designed and tested for operation: -200 to 10,000 ft (-60 to 3000 m)
