Cisco C6800-48P-SFP Catalyst 6800 48x 1GB FC SFP Switch Module w/ DFC4

Quick spec of C6800-48P-SFP-ref

• Product Code : C6800-48P-SFP
• Product Type : 6800 Series 1 Gigabit Modules
• Port connector type : LC (optical) or RJ-45 (copper) depending on the SFP transceiver installed
• Ports/Interface/ Connectors : 48 port; 1000BASE-SX, LX/LH, -ZX, -T; 1000BASE-CWDM; LC connecter
• Port Density/ Chassis Model : ·240 ports/C6807-XL·528 ports/6513E·384 ports/6509E
• Maximum Frame Size : Up to 9216 bytes/frame
• Queues per Port (Tx = Transmit, Rx = Receive) : ·Tx-1p3q8T·Rx-2q8T
• Scheduler : Deficit Weighted Round Robin (DWRR)
• Buffer Size per Port : ·Rx-166KB·Tx-1.17MB
• Onboard Memory : 1GB Default
• Power Requirements : 334.44 and 339.44 Watts respectively
• Backplane connection : Connects to the switch fabric using dual full-duplex 20-Gbps switch fabric channels (40 Gbps total).
• Chassis/slot support : Can occupy slots 1-2 and 5-7 in C6807-XL chassis. Can occupy any slots in Cisco Catalyst 6503E, 6504E, 6506E, 6509E, and 6509-V-E. Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E.
• Supervisor engine : Compatible with Supervisor Engine 2T and Supervisor Engine 2TXL.
• Distributed forwarding and performance :  Comes equipped with DFC4 or DFC4XL daughter cards, delivering optimal performance up to a sustained 60 Mpps for L2, IPv4 and MPLS forwarding and 30 Mpps for IPv6 forwarding.
• Dimensions (H x W x D) : 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis.
• Weight : 9.03 lb (4.1 kg)

C6800-48P-SFP-ref Specification

• Dimensions (H x W x D) :1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis.
• Weight :9.03 lb (4.1 kg)
• Operating temperature :Certified for operation: 32° to 104°F (0° to 40°C) Designed and tested for operation: 32° to 130°F (0° to 55°C)
• Humidity (RH) ambient (noncondensing) :10 to 90 percent
• Operating altitude :Certified for operation: 0 to 6500 ft (0 to 2000 m) Designed and tested for operation: -200 to 10,000 ft (-60 to 3000 m)