ASR1006-X Overview
ASR1006-X is a Cisco ASR1006-X Chassis. The Cisco ASR 1006-X Router in a 6-rack unit (RU) form factor is providing the most flexible edge routing solution in the Cisco ASR 1000 Series. It supports: dual routing processors, embedded services processor, up to 100 Gbps throughput, up to 8 shared port adapters (SPAs), and the highest port density solution of the three Cisco ASR 1000 Routers.Quick spec of ASR1006-X
- Part Number : ASR1006-X
- Route Processor : 2 route-processor slots
- Cisco ASR 1000 Series ESP : 2 ESP slots
- Ethernet Port Adapters : 4 EPA slots
- Shared Port Adapters : 8 SPA slots
- Number of SIPs or Ethernet line cards supported : 2
- Default Memory : 8-GB DRAM RP2 8-GB DRAM RP3
- Dimension : Height: 10.47 in. (265.9 mm) Width: 17.2 in. (437.4 mm) Depth: 18.15 in. (461.0 mm)
- Weight : 36.5 lb empty
ASR1006-X Specification
- Dimension :Height: 10.47 in. (265.9 mm) Width: 17.2 in. (437.4 mm) Depth: 18.15 in. (461.0 mm)
- Default memory :8-GB DRAM RP2 8-GB DRAM RP3
- Number of SIPs or Ethernet line cards supported :2
- Shared port adapters :8 SPA slots
- Ethernet port adapters :4 EPA slots
- Cisco ASR 1000 Series ESP :2 ESP slots
- Route processor :2 route-processor slots
- Redundancy :Hardware: Yes
- Built-in Gigabit Ethernet ports :0
- Built-in 10 Gigabit Ethernet port :No
- Network interface module :No
- ESP support :Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) and Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100)
- ESP bandwidth :40 to 100 Gbps
- ESP memory :Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40): 8-GB DRAM Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100): 16-GB DRAM
- SIPs and Ethernet line cards :Supports Cisco ASR 1000 Series 40-Gbps SIP Carrier Card (ASR1000-SIP40), Cisco ASR1000 Series MIP 100-Gbps Carrier Card (ASR1000-MIP100), and ASR 1000 Fixed Ethernet Line Card; two 10 GE + twenty 1 GE line cards (ASR1000-2T+20X1GE); and six 10 GE line cards (ASR1000-6TGE)
- Embedded hardware-based encryption :Yes: On Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) with up to 11-Gbps crypto support throughput and Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) with up to 29-Gbps crypto support throughput
- Minimum Cisco IOS XE Software release :Cisco IOS XE Software Release 3.16.0
- Rack-mounting :Yes: 19-inch
- Wall-mounting :No
- External USB flash memory :1-GB USB flash-memory support
- Redundant power supply :Yes: Dual power supplies by default, expandable up to a total of six, depending on configuration and redundancy preferences; option of either 1100W AC or 950W DC Note: A mix of AC and DC power supplies is not supported.
- Power input :Worldwide ranging AC input range (85 to 264 VAC) Worldwide ranging DC (-40 to -72; -48V nominal)
-
Power consumption
:
- Maximum (DC): 4600W
- Maximum (AC): 4500W
- Airflow :Front-to-back
- Operating temperature (nominal) :Same as for Cisco ASR 1001-X
- Operating temperature (short-term) :Same as for Cisco ASR 1001-X
- Operating humidity (nominal) (relative humidity) :Same as for Cisco ASR 1001-X
- Operating humidity (short-term) :Same as for Cisco ASR 1001-X
- Storage temperature :Same as for Cisco ASR 1001-X
- Storage humidity (relative humidity) :Same as for Cisco ASR 1001-X
- Operating altitude :Same as for Cisco ASR 1001-X
- Network Equipment Building Standards (NEBS) :GR-1089 and GR-63
- EMC standards :Same as for Cisco ASR 1001-X
- Safety Standard :UL60950-1 CSA C22.2 No. 60950-1-03 EN 60950-1 IEC 60950-1 AS/NZS 60950.1
